Free fox SVG

Trotting fox SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Trotting fox, as a solid black shape
Trotting fox. The preview is the SVG file itself.

A whole fox on the move, one front paw lifted and its brush streaming out behind, with the eye, ear and tail tip cut in. Good for a woodland scene.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size100 × 70 mm (3.94 × 2.75 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length530 mm at this size
Narrowest part1.9 mm at this size
Nodes260 curve and line segments
Also found asFox body SVG

Measured from the file. PNG: 2,000 × 1,419 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.7 in (25 × 18 mm)0.48 mm135 mm130Too fine for most machines
2 × 1.4 in (51 × 35 mm)0.97 mm269 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.09 in (76 × 53 mm)1.4 mm404 mm15Vinyl, card and thin sheet
4 × 2.79 in (102 × 71 mm)1.9 mm538 mm8Vinyl, card and thin sheet
6 × 4.19 in (152 × 106 mm)2.9 mm808 mm2Vinyl, card and thin sheet
8 × 5.58 in (203 × 142 mm)3.9 mm1,077 mm2Any material, including 3 mm wood and acrylic
12 × 8.38 in (305 × 213 mm)5.8 mm1,615 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fox SVG files

← Fox silhouette All 15 foxes Leaping fox silhouette →