Cute fox face SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A round, friendly fox face with big ears, round eyes and a button nose. The cheeks and inner ears are cut away, so white card behind them finishes the face.
What is in the file
| Size | 100 × 80 mm (3.94 × 3.13 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 679 mm at this size |
| Narrowest part | 3.7 mm at this size |
| Nodes | 157 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,606 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.8 in (25 × 20 mm) | 0.94 mm | 172 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.59 in (51 × 40 mm) | 1.9 mm | 345 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.38 in (76 × 61 mm) | 2.8 mm | 517 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.18 in (102 × 81 mm) | 3.8 mm | 690 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.77 in (152 × 121 mm) | 5.6 mm | 1,035 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.36 in (203 × 162 mm) | 7.5 mm | 1,380 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.54 in (305 × 242 mm) | 11 mm | 2,070 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.