Fox outline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The sitting fox drawn as one even line, with a zigzag across the brush where the white tip begins. For colouring pages, foil and pen plotters.
What is in the file
| Size | 100 × 88 mm (3.94 × 3.47 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 746 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 311 curve and line segments |
Measured from the file. PNG: 2,000 × 1,773 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.88 in (25 × 22 mm) | 0.61 mm | 189 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.76 in (51 × 45 mm) | 1.2 mm | 379 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.65 in (76 × 67 mm) | 1.8 mm | 568 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.53 in (102 × 90 mm) | 2.4 mm | 758 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.29 in (152 × 134 mm) | 3.7 mm | 1,137 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.06 in (203 × 179 mm) | 4.9 mm | 1,516 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.58 in (305 × 269 mm) | 7.3 mm | 2,274 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.