Fox silhouette SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A fox standing on all four legs as a solid shape with nothing to weed: pointed muzzle, two tall ears and a full brush held low.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 73 mm (3.94 × 2.86 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 446 mm at this size |
| Narrowest part | 1.6 mm at this size |
| Nodes | 206 curve and line segments |
Measured from the file. PNG: 2,000 × 1,475 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.73 in (25 × 18 mm) | 0.41 mm | 113 mm | 130 | Too fine for most machines |
| 2 × 1.45 in (51 × 37 mm) | 0.81 mm | 227 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.18 in (76 × 55 mm) | 1.2 mm | 340 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.91 in (102 × 74 mm) | 1.6 mm | 453 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.36 in (152 × 111 mm) | 2.4 mm | 680 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.82 in (203 × 148 mm) | 3.3 mm | 906 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.72 in (305 × 222 mm) | 4.9 mm | 1,359 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.