Free fox SVG

Baby fox sitting SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Baby fox sitting, as a solid black shape
Baby fox sitting. The preview is the SVG file itself.

A cub sitting and facing you: a big round head, a small body with a white bib, two front paws and a brush curled up at its side.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size83 × 100 mm (3.26 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length851 mm at this size
Narrowest part1.7 mm at this size
Nodes269 curve and line segments

Measured from the file. PNG: 1,667 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.83 × 1 in (21 × 25 mm)0.43 mm216 mm110Too fine for most machines
1.65 × 2 in (42 × 51 mm)0.86 mm432 mm30Fine detail: vinyl and paper only, weed with care
2.48 × 3 in (63 × 76 mm)1.3 mm648 mm12Vinyl, card and thin sheet
3.31 × 4 in (84 × 102 mm)1.7 mm865 mm6Vinyl, card and thin sheet
4.96 × 6 in (126 × 152 mm)2.6 mm1,297 mm2Vinyl, card and thin sheet
6.62 × 8 in (168 × 203 mm)3.5 mm1,729 mm1Any material, including 3 mm wood and acrylic
9.92 × 12 in (252 × 305 mm)5.2 mm2,594 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fox SVG files

← Fox with a flower crown All 15 foxes Mandala fox head →