Geometric fox head SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A fox head folded from straight lines, like paper: every edge of every facet is drawn as an even line, with a solid nose and two solid eyes. For foil, engraving and wall art.
What is in the file
| Size | 100 × 95 mm (3.94 × 3.74 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 12: 1 outer edge and 11 cut-outs |
| Cut length | 1,313 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 167 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,906 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.95 in (25 × 24 mm) | 0.38 mm | 334 mm | 100 | Too fine for most machines |
| 2 × 1.9 in (51 × 48 mm) | 0.76 mm | 667 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.85 in (76 × 72 mm) | 1.1 mm | 1,001 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.8 in (102 × 97 mm) | 1.5 mm | 1,334 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.71 in (152 × 145 mm) | 2.3 mm | 2,001 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.61 in (203 × 193 mm) | 3 mm | 2,668 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.41 in (305 × 290 mm) | 4.6 mm | 4,002 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.