Free fox SVG

Leaping fox silhouette SVG

Leaping fox silhouette, as a solid black shape — Leaping fox silhouette. The preview is the SVG file itself.

A fox in the middle of a pounce: back arched, nose and front paws pointing at the ground and brush in the air. A solid shape with a lot of movement.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 74 mm (3.94 × 2.91 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	418 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	177 curve and line segments

Measured from the file. PNG: 2,000 × 1,496 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.74 in (25 × 19 mm)	Over 1.5 mm	106 mm	130	Vinyl, card and thin sheet
2 × 1.48 in (51 × 37 mm)	Over 3 mm	212 mm	35	Any material, including 3 mm wood and acrylic
3 × 2.21 in (76 × 56 mm)	Over 4.6 mm	319 mm	15	Any material, including 3 mm wood and acrylic
4 × 2.95 in (102 × 75 mm)	Over 6.1 mm	425 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.43 in (152 × 112 mm)	Over 9.1 mm	637 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.9 in (203 × 150 mm)	Over 12 mm	849 mm	1	Any material, including 3 mm wood and acrylic
12 × 8.86 in (305 × 225 mm)	Over 18 mm	1,274 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fox SVG files

← Trotting fox All 15 foxes Little fox curled up asleep →