Fox head SVG
A fox head from the front: tall ears, cheek tufts and a narrow muzzle, with slanted eyes, inner ears and the two white cheeks cut out. Exactly symmetrical.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 97 mm (3.94 × 3.81 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 743 mm at this size |
| Narrowest part | 3.7 mm at this size |
| Nodes | 186 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,937 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.97 in (25 × 25 mm) | 0.94 mm | 189 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.93 in (51 × 49 mm) | 1.9 mm | 377 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.9 in (76 × 74 mm) | 2.8 mm | 566 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.87 in (102 × 98 mm) | 3.8 mm | 755 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.8 in (152 × 147 mm) | 5.6 mm | 1,132 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.74 in (203 × 196 mm) | 7.5 mm | 1,510 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.6 in (305 × 295 mm) | 11 mm | 2,265 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Cute fox face 
Fox with a flower crown 
Baby fox sitting 
Mandala fox head 
Geometric fox head 
Mother fox and kit 
Fox couple with a heart 
Fox outline 