Free fox SVG

Fox tail SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fox tail, as a solid black shape
Fox tail. The preview is the SVG file itself.

A brush on its own: a long S that swells and runs to a point, with a zigzag window for the white tip and three strokes of fur. For key rings, earrings and bag charms.

What is in the file

Size80 × 100 mm (3.14 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length556 mm at this size
Narrowest part1 mm at this size
Nodes183 curve and line segments

Measured from the file. PNG: 1,612 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.8 × 1 in (20 × 25 mm)0.25 mm141 mm120Too fine for most machines
1.6 × 2 in (41 × 51 mm)0.51 mm282 mm30Fine detail: vinyl and paper only, weed with care
2.39 × 3 in (61 × 76 mm)0.76 mm424 mm12Fine detail: vinyl and paper only, weed with care
3.19 × 4 in (81 × 102 mm)1 mm565 mm6Vinyl, card and thin sheet
4.79 × 6 in (122 × 152 mm)1.5 mm847 mm2Vinyl, card and thin sheet
6.38 × 8 in (162 × 203 mm)2 mm1,130 mm1Vinyl, card and thin sheet
9.58 × 12 in (243 × 305 mm)3 mm1,695 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fox SVG files

← Fox outline All 15 foxes Sitting fox →