Free flame SVG

Heart with flames SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Heart with flames, as a solid black shape
Heart with flames. The preview is the SVG file itself.

A heart on fire: five tongues of flame rise from behind it, parted from the heart by a thin gap that stops short of both sides. For Valentine cards, band shirts and sacred-heart art.

What is in the file

Size69 × 100 mm (2.73 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length589 mm at this size
Narrowest part2 mm at this size
Nodes66 curve and line segments

Measured from the file. PNG: 1,410 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.69 × 1 in (18 × 25 mm)0.51 mm150 mm130Fine detail: vinyl and paper only, weed with care
1.39 × 2 in (35 × 51 mm)1 mm299 mm35Vinyl, card and thin sheet
2.08 × 3 in (53 × 76 mm)1.5 mm449 mm15Vinyl, card and thin sheet
2.77 × 4 in (70 × 102 mm)2 mm598 mm8Vinyl, card and thin sheet
4.16 × 6 in (106 × 152 mm)3 mm898 mm2Any material, including 3 mm wood and acrylic
5.54 × 8 in (141 × 203 mm)4.1 mm1,197 mm2Any material, including 3 mm wood and acrylic
8.32 × 12 in (211 × 305 mm)6.1 mm1,795 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flame SVG files

← Fire pit with flames All 15 flames Flame ring frame →