Free flame SVG

Layered flame in three colours SVG

Layered flame in three colours, in layered colours — Layered flame in three colours. The preview is the SVG file itself.

Three layers to stack: the whole fire in red, a smaller one in orange and a yellow core. Glue them foot to foot for a flame that glows from the middle.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	72 × 100 mm (2.83 × 3.94 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	3 outlines
Cut length	628 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	63 curve and line segments
Layers	3: outer flame, middle flame and core

Measured from the file. PNG: 1,458 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.72 × 1 in (18 × 25 mm)	Over 1.5 mm	160 mm	130	Vinyl, card and thin sheet
1.44 × 2 in (36 × 51 mm)	Over 3 mm	319 mm	35	Any material, including 3 mm wood and acrylic
2.15 × 3 in (55 × 76 mm)	Over 4.6 mm	479 mm	15	Any material, including 3 mm wood and acrylic
2.87 × 4 in (73 × 102 mm)	Over 6.1 mm	638 mm	6	Any material, including 3 mm wood and acrylic
4.31 × 6 in (109 × 152 mm)	Over 9.1 mm	957 mm	2	Any material, including 3 mm wood and acrylic
5.74 × 8 in (146 × 203 mm)	Over 12 mm	1,276 mm	2	Any material, including 3 mm wood and acrylic
8.62 × 12 in (219 × 305 mm)	Over 18 mm	1,914 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flame SVG files

← Flame outline All 15 flames Flame with an inner flame →