Free flame SVG

Bonfire flames on a stack of logs SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bonfire flames on a stack of logs, as a solid black shape
Bonfire flames on a stack of logs. The preview is the SVG file itself.

A tall fire of five tongues roaring up round three logs stood on end like a tent, which show dark against its hollow. Bigger and wilder than the campfire, for autumn nights and bonfire parties.

What is in the file

Size78 × 100 mm (3.08 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length809 mm at this size
Narrowest part1 mm at this size
Nodes149 curve and line segments

Measured from the file. PNG: 1,581 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.78 × 1 in (20 × 25 mm)0.25 mm205 mm120Too fine for most machines
1.56 × 2 in (40 × 51 mm)0.51 mm411 mm30Fine detail: vinyl and paper only, weed with care
2.35 × 3 in (60 × 76 mm)0.76 mm616 mm12Fine detail: vinyl and paper only, weed with care
3.13 × 4 in (79 × 102 mm)1 mm822 mm6Vinyl, card and thin sheet
4.69 × 6 in (119 × 152 mm)1.5 mm1,233 mm2Vinyl, card and thin sheet
6.26 × 8 in (159 × 203 mm)2 mm1,644 mm1Vinyl, card and thin sheet
9.38 × 12 in (238 × 305 mm)3 mm2,466 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flame SVG files

← Campfire with flames All 15 flames Camp fire flames in a ring of stones →