Free flame SVG

Match with a flame SVG

Match with a flame, as a solid black shape — Match with a flame. The preview is the SVG file itself.

A burning match held at a slant: a thin stick, a round head and one small flame with a hollow heart. A neat mark for candle labels, fire-starter kits and camp checklists.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	32 × 100 mm (1.24 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	288 mm at this size
Narrowest part	4.7 mm at this size
Nodes	31 curve and line segments

Measured from the file. PNG: 683 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.32 × 1 in (8 × 25 mm)	1.2 mm	73 mm	230	Vinyl, card and thin sheet
0.63 × 2 in (16 × 51 mm)	2.4 mm	146 mm	70	Vinyl, card and thin sheet
0.95 × 3 in (24 × 76 mm)	3.6 mm	219 mm	30	Any material, including 3 mm wood and acrylic
1.26 × 4 in (32 × 102 mm)	4.8 mm	293 mm	16	Any material, including 3 mm wood and acrylic
1.89 × 6 in (48 × 152 mm)	7.2 mm	439 mm	5	Any material, including 3 mm wood and acrylic
2.52 × 8 in (64 × 203 mm)	9.6 mm	585 mm	4	Any material, including 3 mm wood and acrylic
3.78 × 12 in (96 × 305 mm)	14 mm	878 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flame SVG files

← Flame ring frame All 15 flames Flame outline →