Free flame SVG

Row of flames SVG

Row of flames, as a solid black shape — Row of flames. The preview is the SVG file itself.

Nine tongues of flame, tall and short by turns, rising from a level base that is the same at both ends. Repeat it for a border of fire along a wall, a shelf or a cake board.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 40 mm (3.94 × 1.57 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	385 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	38 curve and line segments

Measured from the file. PNG: 2,000 × 844 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.4 in (25 × 10 mm)	Over 1.5 mm	98 mm	200	Vinyl, card and thin sheet
2 × 0.8 in (51 × 20 mm)	Over 3 mm	196 mm	60	Any material, including 3 mm wood and acrylic
3 × 1.2 in (76 × 30 mm)	Over 4.6 mm	293 mm	24	Any material, including 3 mm wood and acrylic
4 × 1.6 in (102 × 41 mm)	Over 6.1 mm	391 mm	12	Any material, including 3 mm wood and acrylic
6 × 2.39 in (152 × 61 mm)	Over 9.1 mm	587 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.19 in (203 × 81 mm)	Over 12 mm	782 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.79 in (305 × 122 mm)	Over 18 mm	1,173 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flame SVG files

← Simple flame silhouette All 15 flames Hot rod flames →