Free flame SVG

Hot rod flames SVG

Hot rod flames, as a solid black shape — Hot rod flames. The preview is the SVG file itself.

Five licks of flame streaming back from a straight edge, long and short by turns, as painted on the wings of a hot rod. Mirror it for the other side of a car, a helmet or a toolbox.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 58 mm (3.94 × 2.28 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	805 mm at this size
Narrowest part	4.6 mm at this size
Nodes	76 curve and line segments

Measured from the file. PNG: 2,000 × 1,192 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.58 in (25 × 15 mm)	1.2 mm	204 mm	150	Vinyl, card and thin sheet
2 × 1.16 in (51 × 29 mm)	2.3 mm	409 mm	40	Vinyl, card and thin sheet
3 × 1.74 in (76 × 44 mm)	3.5 mm	613 mm	18	Any material, including 3 mm wood and acrylic
4 × 2.32 in (102 × 59 mm)	4.7 mm	818 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.48 in (152 × 88 mm)	7 mm	1,227 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.64 in (203 × 118 mm)	9.3 mm	1,636 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.96 in (305 × 177 mm)	14 mm	2,454 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flame SVG files

← Row of flames All 15 flames Campfire with flames →