Free flame SVG

Fire pit with flames SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fire pit with flames, as a solid black shape
Fire pit with flames. The preview is the SVG file itself.

A wide metal bowl on three legs holding a fire of five tongues, with a band cut round the bowl. For patio signs, garden-party invitations and marshmallow nights.

What is in the file

Size92 × 100 mm (3.61 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length824 mm at this size
Narrowest part1 mm at this size
Nodes169 curve and line segments
Also found asFirepit SVG

Measured from the file. PNG: 1,840 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.25 mm209 mm100Too fine for most machines
1.83 × 2 in (47 × 51 mm)0.51 mm419 mm30Fine detail: vinyl and paper only, weed with care
2.75 × 3 in (70 × 76 mm)0.76 mm628 mm12Fine detail: vinyl and paper only, weed with care
3.67 × 4 in (93 × 102 mm)1 mm837 mm6Vinyl, card and thin sheet
5.5 × 6 in (140 × 152 mm)1.5 mm1,256 mm2Vinyl, card and thin sheet
7.34 × 8 in (186 × 203 mm)2 mm1,674 mm1Vinyl, card and thin sheet
11 × 12 in (280 × 305 mm)3 mm2,512 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flame SVG files

← Torch with a flame All 15 flames Heart with flames →