Free flame SVG

Flame with an inner flame SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Flame with an inner flame, as a solid black shape
Flame with an inner flame. The preview is the SVG file itself.

One fire of three tongues, the tallest in the middle, with a smaller flame cut out inside it and a core left standing in that. All three stay joined at the foot.

What is in the file

Size72 × 100 mm (2.83 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length579 mm at this size
Narrowest part3.6 mm at this size
Nodes51 curve and line segments

Measured from the file. PNG: 1,458 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.72 × 1 in (18 × 25 mm)0.91 mm147 mm130Fine detail: vinyl and paper only, weed with care
1.44 × 2 in (36 × 51 mm)1.8 mm294 mm35Vinyl, card and thin sheet
2.15 × 3 in (55 × 76 mm)2.7 mm441 mm15Vinyl, card and thin sheet
2.87 × 4 in (73 × 102 mm)3.7 mm588 mm6Any material, including 3 mm wood and acrylic
4.31 × 6 in (109 × 152 mm)5.5 mm882 mm2Any material, including 3 mm wood and acrylic
5.74 × 8 in (146 × 203 mm)7.3 mm1,177 mm2Any material, including 3 mm wood and acrylic
8.62 × 12 in (219 × 305 mm)11 mm1,765 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More flame SVG files

← Layered flame in three colours All 15 flames Simple flame silhouette →