Free elf SVG

Elf hat and legs with room for a name SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Elf hat and legs with room for a name, as a solid black shape — Elf hat and legs with room for a name. The preview is the SVG file itself.

Two loose pieces: a hat with a zigzag brim and a bell above, and a zigzag hem with two striped legs and curly shoes below. Put a name between them and it becomes the elf.

What is in the file

Size	54 × 100 mm (2.11 × 3.94 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	8: 2 outer edges and 6 cut-outs
Cut length	555 mm at this size
Narrowest part	1.6 mm at this size
Nodes	101 curve and line segments

Measured from the file. PNG: 1,108 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.54 × 1 in (14 × 25 mm)	0.41 mm	141 mm	160	Too fine for most machines
1.07 × 2 in (27 × 51 mm)	0.81 mm	282 mm	45	Fine detail: vinyl and paper only, weed with care
1.61 × 3 in (41 × 76 mm)	1.2 mm	423 mm	18	Vinyl, card and thin sheet
2.14 × 4 in (54 × 102 mm)	1.6 mm	564 mm	10	Vinyl, card and thin sheet
3.22 × 6 in (82 × 152 mm)	2.4 mm	846 mm	3	Vinyl, card and thin sheet
4.29 × 8 in (109 × 203 mm)	3.3 mm	1,128 mm	2	Any material, including 3 mm wood and acrylic
6.43 × 12 in (163 × 305 mm)	4.9 mm	1,692 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More elf SVG files

← Elf peeking over an edge All 14 elves Elf face outline →