Free elf SVG

Elf face outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Elf face outline, drawn as a line
Elf face outline. The preview is the SVG file itself.

The elf face as a line about 3 mm wide, with the zigzags of the brim and collar drawn in. The eyes and the smile are loose pieces inside it. For colouring, foil and pen plotting.

What is in the file

Size82 × 100 mm (3.21 × 3.94 in), scales to any size
Pieces4 separate pieces
Outlines to cut6: 4 outer edges and 2 cut-outs
Cut length987 mm at this size
Narrowest part2.6 mm at this size
Nodes216 curve and line segments

Measured from the file. PNG: 1,644 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.82 × 1 in (21 × 25 mm)0.66 mm251 mm120Fine detail: vinyl and paper only, weed with care
1.63 × 2 in (41 × 51 mm)1.3 mm501 mm30Vinyl, card and thin sheet
2.44 × 3 in (62 × 76 mm)2 mm752 mm12Vinyl, card and thin sheet
3.26 × 4 in (83 × 102 mm)2.6 mm1,003 mm6Vinyl, card and thin sheet
4.89 × 6 in (124 × 152 mm)4 mm1,504 mm2Any material, including 3 mm wood and acrylic
6.52 × 8 in (166 × 203 mm)5.3 mm2,006 mm1Any material, including 3 mm wood and acrylic
9.78 × 12 in (248 × 305 mm)7.9 mm3,008 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More elf SVG files

← Elf hat and legs with room for a name All 14 elves Layered elf waving both hands →