Elf face with a hat and pointed ears SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A round face with two eyes and a smile, a pointed ear at each side, a drooping hat with a zigzag brim and a bell on the tip, and a zigzag collar under the chin. Slits mark the brim and the collar, and the whole face is one piece.
What is in the file
| Size | 82 × 100 mm (3.21 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 657 mm at this size |
| Narrowest part | 4.4 mm at this size |
| Nodes | 122 curve and line segments |
Measured from the file. PNG: 1,644 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.82 × 1 in (21 × 25 mm) | 1.1 mm | 167 mm | 120 | Vinyl, card and thin sheet |
| 1.63 × 2 in (41 × 51 mm) | 2.2 mm | 334 mm | 30 | Vinyl, card and thin sheet |
| 2.44 × 3 in (62 × 76 mm) | 3.4 mm | 501 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.26 × 4 in (83 × 102 mm) | 4.5 mm | 668 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.89 × 6 in (124 × 152 mm) | 6.7 mm | 1,001 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.52 × 8 in (166 × 203 mm) | 8.9 mm | 1,335 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.78 × 12 in (248 × 305 mm) | 13 mm | 2,003 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More elf SVG files
-
Standing elf waving Solid · one piece -
Elf legs sticking up out of the snow Solid · one piece -
Elf feet: a pair of curly-toed shoes Solid · one piece -
Elf body for the front of a shirt Solid · one piece -
Elf collar with seven bells Solid · one piece -
Elf monogram frame with hat and ears Solid · one piece -
Girl elf face with braids Solid · one piece -
Three elves holding hands Solid · one piece
← Layered elf waving both hands All 14 elves Standing elf waving →