Elf feet: a pair of curly-toed shoes SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two elf shoes with the heels together and the toes turned out, each with a cuff, a striped stocking above it and a bell on the curled toe. Put them under a name or a monogram so it looks as if the elf is standing behind it.
What is in the file
| Size | 100 × 42 mm (3.94 × 1.63 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 10: 1 outer edge and 9 cut-outs |
| Cut length | 557 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 80 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 875 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.42 in (25 × 11 mm) | 0.64 mm | 141 mm | 190 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.83 in (51 × 21 mm) | 1.3 mm | 283 mm | 55 | Vinyl, card and thin sheet |
| 3 × 1.24 in (76 × 32 mm) | 1.9 mm | 424 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.66 in (102 × 42 mm) | 2.5 mm | 566 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.49 in (152 × 63 mm) | 3.8 mm | 849 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.32 in (203 × 84 mm) | 5.1 mm | 1,132 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.98 in (305 × 126 mm) | 7.6 mm | 1,698 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More elf SVG files
-
Elf body for the front of a shirt Solid · one piece -
Elf collar with seven bells Solid · one piece -
Elf monogram frame with hat and ears Solid · one piece -
Girl elf face with braids Solid · one piece -
Three elves holding hands Solid · one piece -
Jumping elf silhouette Solid · one piece -
Elf peeking over an edge Solid · one piece -
Elf hat and legs with room for a name Solid · 2 pieces
← Elf legs sticking up out of the snow All 14 elves Elf body for the front of a shirt →