Elf peeking over an edge SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The top half of an elf face looking over a straight ledge, with three fingers of each hand hooked over it. Run the ledge along the top of a sign, a pocket or a name.
What is in the file
| Size | 100 × 93 mm (3.94 × 3.65 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 735 mm at this size |
| Narrowest part | 4.7 mm at this size |
| Nodes | 125 curve and line segments |
Measured from the file. PNG: 2,000 × 1,860 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.93 in (25 × 24 mm) | 1.2 mm | 187 mm | 100 | Vinyl, card and thin sheet |
| 2 × 1.85 in (51 × 47 mm) | 2.4 mm | 373 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.78 in (76 × 71 mm) | 3.6 mm | 560 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.71 in (102 × 94 mm) | 4.8 mm | 747 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.56 in (152 × 141 mm) | 7.2 mm | 1,120 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.42 in (203 × 188 mm) | 9.6 mm | 1,494 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.12 in (305 × 283 mm) | 14 mm | 2,240 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More elf SVG files
-
Elf hat and legs with room for a name Solid · 2 pieces -
Elf face outline Outline · 4 pieces -
Layered elf waving both hands Layered · 12 pieces -
Elf face with a hat and pointed ears Solid · one piece -
Standing elf waving Solid · one piece -
Elf legs sticking up out of the snow Solid · one piece -
Elf feet: a pair of curly-toed shoes Solid · one piece -
Elf body for the front of a shirt Solid · one piece
← Jumping elf silhouette All 14 elves Elf hat and legs with room for a name →