Layered elf waving both hands SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
An elf from the waist up with both hands in the air, in five colours: a dark backing, skin, a green hat and tunic, a red brim and collar and a gold bell, with the eyes and smile cut again in the dark colour for the top. Stack the layers on the backing.
What is in the file
| Size | 86 × 100 mm (3.37 × 3.94 in), scales to any size |
|---|---|
| Pieces | 12 separate pieces |
| Outlines to cut | 12 outlines |
| Cut length | 1,409 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 183 curve and line segments |
| Layers | 6: backing, skin, hat and tunic, brim and collar, bell and face |
Measured from the file. PNG: 1,725 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.86 × 1 in (22 × 25 mm) | Over 1.5 mm | 358 mm | 110 | Vinyl, card and thin sheet |
| 1.71 × 2 in (44 × 51 mm) | Over 3 mm | 716 mm | 30 | Any material, including 3 mm wood and acrylic |
| 2.57 × 3 in (65 × 76 mm) | Over 4.6 mm | 1,074 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.43 × 4 in (87 × 102 mm) | Over 6.1 mm | 1,432 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.14 × 6 in (131 × 152 mm) | Over 9.1 mm | 2,147 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.86 × 8 in (174 × 203 mm) | Over 12 mm | 2,863 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.28 × 12 in (261 × 305 mm) | Over 18 mm | 4,295 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More elf SVG files
-
Elf face with a hat and pointed ears Solid · one piece -
Standing elf waving Solid · one piece -
Elf legs sticking up out of the snow Solid · one piece -
Elf feet: a pair of curly-toed shoes Solid · one piece -
Elf body for the front of a shirt Solid · one piece -
Elf collar with seven bells Solid · one piece -
Elf monogram frame with hat and ears Solid · one piece -
Girl elf face with braids Solid · one piece
← Elf face outline All 14 elves Elf face with a hat and pointed ears →