Free elf SVG

Elf collar with seven bells SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Elf collar with seven bells, as a solid black shape
Elf collar with seven bells. The preview is the SVG file itself.

A collar on its own: seven pointed teeth fanned round a neckline, a bell with a hole on each tip and a slit that marks the neckband. It sits under the neck of a shirt or a baby vest.

What is in the file

Size100 × 49 mm (3.94 × 1.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length613 mm at this size
Narrowest part2.9 mm at this size
Nodes83 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,027 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.49 in (25 × 13 mm)0.74 mm156 mm170Fine detail: vinyl and paper only, weed with care
2 × 0.99 in (51 × 25 mm)1.5 mm311 mm50Vinyl, card and thin sheet
3 × 1.48 in (76 × 38 mm)2.2 mm467 mm21Vinyl, card and thin sheet
4 × 1.98 in (102 × 50 mm)2.9 mm623 mm10Vinyl, card and thin sheet
6 × 2.96 in (152 × 75 mm)4.4 mm934 mm3Any material, including 3 mm wood and acrylic
8 × 3.95 in (203 × 100 mm)5.9 mm1,246 mm2Any material, including 3 mm wood and acrylic
12 × 5.93 in (305 × 151 mm)8.8 mm1,868 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More elf SVG files

← Elf body for the front of a shirt All 14 elves Elf monogram frame with hat and ears →