Three elves holding hands SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Three elves in a row, the middle one a little taller, joined at the hands so that the row cuts as one piece. The faces and belts are cut out; at this size the finer slits are left off. Best at 150 mm wide or more.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 68 mm (3.94 × 2.69 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 16: 1 outer edge and 15 cut-outs |
| Cut length | 1,134 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 354 curve and line segments |
Measured from the file. PNG: 2,000 × 1,388 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.68 in (25 × 17 mm) | 0.3 mm | 288 mm | 130 | Too fine for most machines |
| 2 × 1.36 in (51 × 35 mm) | 0.61 mm | 576 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.05 in (76 × 52 mm) | 0.91 mm | 864 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.73 in (102 × 69 mm) | 1.2 mm | 1,152 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.09 in (152 × 104 mm) | 1.8 mm | 1,728 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.46 in (203 × 139 mm) | 2.4 mm | 2,304 mm | 2 | Vinyl, card and thin sheet |
| 12 × 8.18 in (305 × 208 mm) | 3.7 mm | 3,456 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More elf SVG files
-
Jumping elf silhouette Solid · one piece
-
Elf peeking over an edge Solid · one piece
-
Elf hat and legs with room for a name Solid · 2 pieces
-
Elf face outline Outline · 4 pieces
-
Layered elf waving both hands Layered · 12 pieces
-
Elf face with a hat and pointed ears Solid · one piece
-
Standing elf waving Solid · one piece
-
Elf legs sticking up out of the snow Solid · one piece
← Girl elf face with braids All 14 elves Jumping elf silhouette →