Free earring SVG

Stacked half moon earrings in two parts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Stacked half moon earrings in two parts, as a solid black shape
Stacked half moon earrings in two parts. The preview is the SVG file itself.

A two-part earring, as a pair: a small disc with two holes that sits at the ear, and a half moon with a fan of five slots that hangs from it on a jump ring. Four pieces in all.

What is in the file

Size100 × 43 mm (3.94 × 1.7 in), scales to any size
Pieces4 separate pieces
Outlines to cut20: 4 outer edges and 16 cut-outs
Cut length604 mm at this size
Narrowest part2.4 mm at this size
Nodes90 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 910 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.61 mm153 mm190Fine detail: vinyl and paper only, weed with care
2 × 0.87 in (51 × 22 mm)1.2 mm307 mm55Vinyl, card and thin sheet
3 × 1.3 in (76 × 33 mm)1.8 mm460 mm24Vinyl, card and thin sheet
4 × 1.73 in (102 × 44 mm)2.4 mm614 mm12Vinyl, card and thin sheet
6 × 2.6 in (152 × 66 mm)3.7 mm920 mm4Any material, including 3 mm wood and acrylic
8 × 3.46 in (203 × 88 mm)4.9 mm1,227 mm3Any material, including 3 mm wood and acrylic
12 × 5.2 in (305 × 132 mm)7.3 mm1,841 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More earring SVG files

← Cross earring blanks All 18 earrings Six earring shapes as blanks →