Free earring SVG

Six earring shapes as blanks SVG

Six earring shapes as blanks, as a solid black shape — Six earring shapes as blanks. The preview is the SVG file itself.

Six small blanks with holes, two of each, on one sheet: a round drop, a teardrop, a petal, a bar, a crystal and an arch. Twelve pieces to try shapes in scrap before cutting good leather.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 79 mm (3.94 × 3.12 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	24: 12 outer edges and 12 cut-outs
Cut length	1,211 mm at this size
Narrowest part	1.8 mm at this size
Nodes	196 curve and line segments

Measured from the file. PNG: 2,000 × 1,602 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.79 in (25 × 20 mm)	0.46 mm	308 mm	120	Too fine for most machines
2 × 1.59 in (51 × 40 mm)	0.91 mm	615 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.38 in (76 × 60 mm)	1.4 mm	923 mm	12	Vinyl, card and thin sheet
4 × 3.17 in (102 × 81 mm)	1.8 mm	1,230 mm	6	Vinyl, card and thin sheet
6 × 4.76 in (152 × 121 mm)	2.7 mm	1,846 mm	2	Vinyl, card and thin sheet
8 × 6.34 in (203 × 161 mm)	3.7 mm	2,461 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.52 in (305 × 242 mm)	5.5 mm	3,691 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More earring SVG files

← Stacked half moon earrings in two parts All 18 earrings Earring display card →