Free earring SVG

Geometric crystal earrings SVG

Geometric crystal earrings, drawn as a line
Geometric crystal earrings. The preview is the SVG file itself.

A pair of long six-sided crystals drawn as a frame, with a line across the shoulders and two facet lines that run down to the bottom point. Open and light, best in wood or acrylic at 50 mm tall.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size97 × 100 mm (3.82 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut12: 2 outer edges and 10 cut-outs
Cut length1,320 mm at this size
Narrowest part4.4 mm at this size
Nodes80 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,942 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.97 × 1 in (25 × 25 mm)1.1 mm335 mm100Vinyl, card and thin sheet
1.94 × 2 in (49 × 51 mm)2.2 mm671 mm25Vinyl, card and thin sheet
2.91 × 3 in (74 × 76 mm)3.4 mm1,006 mm9Any material, including 3 mm wood and acrylic
3.88 × 4 in (99 × 102 mm)4.5 mm1,341 mm4Any material, including 3 mm wood and acrylic
5.82 × 6 in (148 × 152 mm)6.7 mm2,012 mm2Any material, including 3 mm wood and acrylic
7.76 × 8 in (197 × 203 mm)8.9 mm2,682 mm1Any material, including 3 mm wood and acrylic
11.64 × 12 in (296 × 305 mm)13 mm4,023 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More earring SVG files

← Rainbow arch earrings All 18 earrings Layered kite earrings →