Free earring SVG

Crescent hoop earrings SVG

Crescent hoop earrings, as a solid black shape — Crescent hoop earrings. The preview is the SVG file itself.

A pair of flat hoops that are slim at the top and broad at the bottom, each with a small tab for the ear wire. Meant to be worn about 36 mm across.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 50 mm (3.94 × 1.96 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	6: 2 outer edges and 4 cut-outs
Cut length	528 mm at this size
Narrowest part	2.7 mm at this size
Nodes	67 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,037 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.5 in (25 × 13 mm)	0.69 mm	134 mm	170	Fine detail: vinyl and paper only, weed with care
2 × 1 in (51 × 25 mm)	1.4 mm	268 mm	50	Vinyl, card and thin sheet
3 × 1.5 in (76 × 38 mm)	2.1 mm	402 mm	21	Vinyl, card and thin sheet
4 × 2 in (102 × 51 mm)	2.7 mm	536 mm	10	Vinyl, card and thin sheet
6 × 2.99 in (152 × 76 mm)	4.1 mm	805 mm	3	Any material, including 3 mm wood and acrylic
8 × 3.99 in (203 × 101 mm)	5.5 mm	1,073 mm	2	Any material, including 3 mm wood and acrylic
12 × 5.99 in (305 × 152 mm)	8.2 mm	1,609 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More earring SVG files

← Layered kite earrings All 18 earrings Circle earrings with petal windows →