Free earring SVG

Cross earring blanks SVG

Cross earring blanks, as a solid black shape
Cross earring blanks. The preview is the SVG file itself.

A pair of plain crosses with softly rounded corners and the hole at the top of the upright. A sturdy blank for wood, acrylic and leather, to wear at 45 mm tall.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 80 mm (3.94 × 3.15 in), scales to any size
Pieces2 separate pieces
Outlines to cut4: 2 outer edges and 2 cut-outs
Cut length504 mm at this size
Narrowest part4.8 mm at this size
Nodes56 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,615 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.8 in (25 × 20 mm)1.2 mm128 mm120Vinyl, card and thin sheet
2 × 1.6 in (51 × 41 mm)2.4 mm256 mm30Vinyl, card and thin sheet
3 × 2.4 in (76 × 61 mm)3.7 mm384 mm12Any material, including 3 mm wood and acrylic
4 × 3.2 in (102 × 81 mm)4.9 mm512 mm6Any material, including 3 mm wood and acrylic
6 × 4.8 in (152 × 122 mm)7.3 mm768 mm2Any material, including 3 mm wood and acrylic
8 × 6.4 in (203 × 163 mm)9.8 mm1,024 mm1Any material, including 3 mm wood and acrylic
12 × 9.6 in (305 × 244 mm)15 mm1,536 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More earring SVG files

← Flower earring templates All 18 earrings Stacked half moon earrings in two parts →