Free earring SVG

Rainbow arch earrings SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Rainbow arch earrings, as a solid black shape
Rainbow arch earrings. The preview is the SVG file itself.

A pair of arches: two bands joined at the feet, open in the middle, with a round tab at the top for the hole. The boho shape for cork, leather and clay-look acrylic, worn about 40 mm tall.

What is in the file

Size100 × 62 mm (3.94 × 2.46 in), scales to any size
Pieces2 separate pieces
Outlines to cut6: 2 outer edges and 4 cut-outs
Cut length1,000 mm at this size
Narrowest part2 mm at this size
Nodes86 curve and line segments
SymmetryMirror
Also found asBoho earring SVG

Measured from the file. PNG: 2,000 × 1,277 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.62 in (25 × 16 mm)0.51 mm254 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.25 in (51 × 32 mm)1 mm508 mm40Vinyl, card and thin sheet
3 × 1.87 in (76 × 48 mm)1.5 mm762 mm15Vinyl, card and thin sheet
4 × 2.5 in (102 × 63 mm)2 mm1,016 mm8Vinyl, card and thin sheet
6 × 3.74 in (152 × 95 mm)3 mm1,524 mm3Any material, including 3 mm wood and acrylic
8 × 4.99 in (203 × 127 mm)4.1 mm2,032 mm2Any material, including 3 mm wood and acrylic
12 × 7.49 in (305 × 190 mm)6.1 mm3,048 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More earring SVG files

← Petal earring blanks All 18 earrings Geometric crystal earrings →