Open heart earrings SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A pair of hearts drawn as a band about 7 mm wide, with a tab tucked into the notch for the hole so the heart hangs straight. To wear at about 30 mm tall.
What is in the file
| Size | 100 × 43 mm (3.94 × 1.69 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 6: 2 outer edges and 4 cut-outs |
| Cut length | 507 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 116 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 902 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.43 in (25 × 11 mm) | 0.64 mm | 129 mm | 190 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.86 in (51 × 22 mm) | 1.3 mm | 258 mm | 55 | Vinyl, card and thin sheet |
| 3 × 1.29 in (76 × 33 mm) | 1.9 mm | 386 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.72 in (102 × 44 mm) | 2.5 mm | 515 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.57 in (152 × 65 mm) | 3.8 mm | 773 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.43 in (203 × 87 mm) | 5.1 mm | 1,030 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.15 in (305 × 131 mm) | 7.6 mm | 1,545 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More earring SVG files
-
Chevron earring templates Solid · 2 pieces
-
Feather earring templates Solid · 2 pieces
-
Bar earrings with circle cut-outs Solid · 2 pieces
-
Flower earring templates Solid · 2 pieces
-
Cross earring blanks Solid · 2 pieces
-
Stacked half moon earrings in two parts Solid · 4 pieces
-
Six earring shapes as blanks Solid · 12 pieces
-
Earring display card Solid · one piece
← Fringe earring templates All 18 earrings Chevron earring templates →