Free earring SVG

Flower earring templates SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Flower earring templates, as a solid black shape
Flower earring templates. The preview is the SVG file itself.

A pair of daisies with eight round petals and an open middle; the hole sits in the top petal. Sweet at 30 mm across in felt, leather or wood.

What is in the file

Size100 × 48 mm (3.94 × 1.87 in), scales to any size
Pieces2 separate pieces
Outlines to cut6: 2 outer edges and 4 cut-outs
Cut length424 mm at this size
Narrowest part3 mm at this size
Nodes70 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 990 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.48 in (25 × 12 mm)0.76 mm108 mm180Fine detail: vinyl and paper only, weed with care
2 × 0.95 in (51 × 24 mm)1.5 mm215 mm50Vinyl, card and thin sheet
3 × 1.42 in (76 × 36 mm)2.3 mm323 mm21Vinyl, card and thin sheet
4 × 1.9 in (102 × 48 mm)3 mm431 mm10Any material, including 3 mm wood and acrylic
6 × 2.85 in (152 × 72 mm)4.6 mm646 mm4Any material, including 3 mm wood and acrylic
8 × 3.8 in (203 × 97 mm)6.1 mm862 mm3Any material, including 3 mm wood and acrylic
12 × 5.7 in (305 × 145 mm)9.1 mm1,292 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More earring SVG files

← Bar earrings with circle cut-outs All 18 earrings Cross earring blanks →