Free earring SVG

Feather earring templates SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Feather earring templates, as a solid black shape
Feather earring templates. The preview is the SVG file itself.

A pair of feathers that hang by the quill, the vane slit into barbs on both sides of a solid spine. The slits run to the edge, so the barbs can be ruffled in soft leather.

What is in the file

Size72 × 100 mm (2.84 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut4: 2 outer edges and 2 cut-outs
Cut length1,320 mm at this size
Narrowest part2.6 mm at this size
Nodes186 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,465 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.72 × 1 in (18 × 25 mm)0.66 mm335 mm130Fine detail: vinyl and paper only, weed with care
1.44 × 2 in (37 × 51 mm)1.3 mm671 mm35Vinyl, card and thin sheet
2.17 × 3 in (55 × 76 mm)2 mm1,006 mm15Vinyl, card and thin sheet
2.89 × 4 in (73 × 102 mm)2.6 mm1,341 mm6Vinyl, card and thin sheet
4.33 × 6 in (110 × 152 mm)4 mm2,012 mm2Any material, including 3 mm wood and acrylic
5.78 × 8 in (147 × 203 mm)5.3 mm2,682 mm2Any material, including 3 mm wood and acrylic
8.66 × 12 in (220 × 305 mm)7.9 mm4,023 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More earring SVG files

← Chevron earring templates All 18 earrings Bar earrings with circle cut-outs →