Free dragonfly SVG

Dragonfly wings SVG

Dragonfly wings, as a solid black shape — Dragonfly wings. The preview is the SVG file itself.

Two pairs of dragonfly wings joined at a small hub, each wing a ladder of cells either side of a spar. Add your own body, a fairy or a name between them, or use them alone.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 39 mm (3.94 × 1.53 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	55: 1 outer edge and 54 cut-outs
Cut length	1,227 mm at this size
Narrowest part	1.8 mm at this size
Nodes	320 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 825 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.39 in (25 × 10 mm)	0.46 mm	312 mm	200	Too fine for most machines
2 × 0.78 in (51 × 20 mm)	0.91 mm	623 mm	60	Fine detail: vinyl and paper only, weed with care
3 × 1.17 in (76 × 30 mm)	1.4 mm	935 mm	24	Vinyl, card and thin sheet
4 × 1.56 in (102 × 40 mm)	1.8 mm	1,247 mm	12	Vinyl, card and thin sheet
6 × 2.33 in (152 × 59 mm)	2.7 mm	1,870 mm	4	Vinyl, card and thin sheet
8 × 3.11 in (203 × 79 mm)	3.7 mm	2,493 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.67 in (305 × 119 mm)	5.5 mm	3,740 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dragonfly SVG files

← Dragonfly wing All 14 dragonflies Steampunk dragonfly with gears →