Free dragonfly SVG

Dragonfly outline SVG

Dragonfly outline, drawn as a line — Dragonfly outline. The preview is the SVG file itself.

The dragonfly with its wings drawn as outlines with a single spar, and a solid body. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 85 mm (3.94 × 3.33 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	1,223 mm at this size
Narrowest part	1.9 mm at this size
Nodes	153 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,702 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.85 in (25 × 21 mm)	0.48 mm	311 mm	110	Too fine for most machines
2 × 1.69 in (51 × 43 mm)	0.97 mm	621 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.54 in (76 × 64 mm)	1.4 mm	932 mm	12	Vinyl, card and thin sheet
4 × 3.38 in (102 × 86 mm)	1.9 mm	1,243 mm	6	Vinyl, card and thin sheet
6 × 5.07 in (152 × 129 mm)	2.9 mm	1,864 mm	2	Vinyl, card and thin sheet
8 × 6.76 in (203 × 172 mm)	3.9 mm	2,485 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.14 in (305 × 258 mm)	5.8 mm	3,728 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dragonfly SVG files

← Dragonfly trio All 14 dragonflies Layered dragonfly in three colours →