Free dragonfly SVG

Dragonfly wing SVG

Dragonfly wing, as a solid black shape — Dragonfly wing. The preview is the SVG file itself.

A single dragonfly wing drawn large, with two spars, a ladder of cross veins and the dark cell near the tip left solid. A study piece for jewellery, resin and laser-cut decoration.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 27 mm (3.94 × 1.06 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	34: 1 outer edge and 33 cut-outs
Cut length	941 mm at this size
Narrowest part	1.9 mm at this size
Nodes	159 curve and line segments

Measured from the file. PNG: 2,000 × 594 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.27 in (25 × 7 mm)	0.48 mm	239 mm	260	Too fine for most machines
2 × 0.54 in (51 × 14 mm)	0.97 mm	478 mm	80	Fine detail: vinyl and paper only, weed with care
3 × 0.81 in (76 × 20 mm)	1.4 mm	717 mm	36	Vinyl, card and thin sheet
4 × 1.08 in (102 × 27 mm)	1.9 mm	956 mm	18	Vinyl, card and thin sheet
6 × 1.61 in (152 × 41 mm)	2.9 mm	1,434 mm	6	Vinyl, card and thin sheet
8 × 2.15 in (203 × 55 mm)	3.9 mm	1,912 mm	5	Any material, including 3 mm wood and acrylic
12 × 3.23 in (305 × 82 mm)	5.8 mm	2,868 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dragonfly SVG files

← Dragonfly with heart wings All 14 dragonflies Dragonfly wings →