Free dragonfly SVG

Dragonfly in a mandala ring SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dragonfly in a mandala ring, as a solid black shape
Dragonfly in a mandala ring. The preview is the SVG file itself.

A dragonfly with veined wings inside a ring edged with twenty scallops. Its wing tips and tail are welded to the ring, so it hangs as a sun catcher or sits as a coaster.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut67: 1 outer edge and 66 cut-outs
Cut length2,092 mm at this size
Narrowest part1 mm at this size
Nodes563 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.25 mm531 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.51 mm1,063 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)0.76 mm1,594 mm9Fine detail: vinyl and paper only, weed with care
4 × 4 in (102 × 102 mm)1 mm2,125 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)1.5 mm3,188 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)2 mm4,251 mm1Vinyl, card and thin sheet
12 × 12 in (305 × 305 mm)3 mm6,376 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dragonfly SVG files

← Dragonfly on a cattail All 14 dragonflies Whimsical dragonfly with a curly tail →