Free dragonfly SVG

Whimsical dragonfly with a curly tail SVG

Whimsical dragonfly with a curly tail, as a solid black shape — Whimsical dragonfly with a curly tail. The preview is the SVG file itself.

A playful dragonfly with broad wings, a swirl cut into each, curled antennae and a tail that ends in a curl. For children's rooms, garden signs and scrapbook pages.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 89 mm (3.94 × 3.49 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	988 mm at this size
Narrowest part	3.3 mm at this size
Nodes	281 curve and line segments

Measured from the file. PNG: 2,000 × 1,783 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.89 in (25 × 23 mm)	0.84 mm	251 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.77 in (51 × 45 mm)	1.7 mm	502 mm	30	Vinyl, card and thin sheet
3 × 2.66 in (76 × 68 mm)	2.5 mm	753 mm	12	Vinyl, card and thin sheet
4 × 3.55 in (102 × 90 mm)	3.4 mm	1,004 mm	6	Any material, including 3 mm wood and acrylic
6 × 5.32 in (152 × 135 mm)	5 mm	1,506 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.1 in (203 × 180 mm)	6.7 mm	2,008 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.64 in (305 × 270 mm)	10 mm	3,011 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dragonfly SVG files

← Dragonfly in a mandala ring All 14 dragonflies Dragonfly trio →