Free dragonfly SVG

Dragonfly with veined wings SVG

Dragonfly with veined wings, as a solid black shape — Dragonfly with veined wings. The preview is the SVG file itself.

A dragonfly seen from above with four long wings, each a frame with a spar and four cross veins and the cells between them cut out, a thorax, two big eyes and a beaded tail.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 85 mm (3.94 × 3.33 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	39: 1 outer edge and 38 cut-outs
Cut length	1,299 mm at this size
Narrowest part	2.6 mm at this size
Nodes	342 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,702 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.85 in (25 × 21 mm)	0.66 mm	330 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.69 in (51 × 43 mm)	1.3 mm	660 mm	30	Vinyl, card and thin sheet
3 × 2.54 in (76 × 64 mm)	2 mm	990 mm	12	Vinyl, card and thin sheet
4 × 3.38 in (102 × 86 mm)	2.6 mm	1,320 mm	6	Vinyl, card and thin sheet
6 × 5.07 in (152 × 129 mm)	4 mm	1,980 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.76 in (203 × 172 mm)	5.3 mm	2,640 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.14 in (305 × 258 mm)	7.9 mm	3,959 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dragonfly SVG files

← Layered dragonfly in three colours All 14 dragonflies Dragonfly silhouette →