Free dragonfly SVG

Dragonfly on a cattail SVG

Dragonfly on a cattail, as a solid black shape — Dragonfly on a cattail. The preview is the SVG file itself.

A dragonfly resting on the tip of a cattail, with a second cattail and four long leaves rising from a strip of ground. One piece, for pond signs, cards and summer windows.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	73 × 100 mm (2.88 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	29: 1 outer edge and 28 cut-outs
Cut length	1,215 mm at this size
Narrowest part	1.5 mm at this size
Nodes	343 curve and line segments

Measured from the file. PNG: 1,485 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.73 × 1 in (19 × 25 mm)	0.38 mm	309 mm	130	Too fine for most machines
1.46 × 2 in (37 × 51 mm)	0.76 mm	617 mm	35	Fine detail: vinyl and paper only, weed with care
2.2 × 3 in (56 × 76 mm)	1.1 mm	926 mm	15	Vinyl, card and thin sheet
2.93 × 4 in (74 × 102 mm)	1.5 mm	1,234 mm	6	Vinyl, card and thin sheet
4.39 × 6 in (112 × 152 mm)	2.3 mm	1,852 mm	2	Vinyl, card and thin sheet
5.86 × 8 in (149 × 203 mm)	3 mm	2,469 mm	2	Any material, including 3 mm wood and acrylic
8.78 × 12 in (223 × 305 mm)	4.6 mm	3,703 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dragonfly SVG files

← Steampunk dragonfly with gears All 14 dragonflies Dragonfly in a mandala ring →