Steampunk dragonfly with gears SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A steampunk dragonfly: wing frames with small gears set inside them and a large twelve-tooth gear behind the thorax. The gear teeth are fine, so cut it at full size or larger.
What is in the file
| Size | 100 × 85 mm (3.94 × 3.33 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 102: 1 outer edge and 101 cut-outs |
| Cut length | 1,450 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 831 curve and line segments |
| Symmetry | Mirror |
| Also found as | Gears and dragonfly SVG |
Measured from the file. PNG: 2,000 × 1,702 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.85 in (25 × 21 mm) | 0.25 mm | 368 mm | 110 | Too fine for most machines |
| 2 × 1.69 in (51 × 43 mm) | 0.51 mm | 737 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.54 in (76 × 64 mm) | 0.76 mm | 1,105 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.38 in (102 × 86 mm) | 1 mm | 1,473 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.07 in (152 × 129 mm) | 1.5 mm | 2,210 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.76 in (203 × 172 mm) | 2 mm | 2,946 mm | 1 | Vinyl, card and thin sheet |
| 12 × 10.14 in (305 × 258 mm) | 3 mm | 4,420 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More dragonfly SVG files
-
Dragonfly on a cattail Solid · one piece
-
Dragonfly in a mandala ring Solid · one piece
-
Whimsical dragonfly with a curly tail Solid · one piece
-
Dragonfly trio Solid · 3 pieces
-
Dragonfly outline Outline · one piece
-
Layered dragonfly in three colours Layered · 5 pieces
-
Dragonfly with veined wings Solid · one piece
-
Dragonfly silhouette Solid · one piece
← Dragonfly wings All 14 dragonflies Dragonfly on a cattail →