Free donut SVG

Stack of three donuts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Stack of three donuts, as a solid black shape
Stack of three donuts. The preview is the SVG file itself.

Three iced donuts seen from the side, piled a little out of line. A wavy cut line marks the icing on each, and a slim gap separates one donut from the next.

What is in the file

Size100 × 83 mm (3.94 × 3.26 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length1,324 mm at this size
Narrowest part1.3 mm at this size
Nodes616 curve and line segments

Measured from the file. PNG: 2,000 × 1,669 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.83 in (25 × 21 mm)0.33 mm336 mm110Too fine for most machines
2 × 1.66 in (51 × 42 mm)0.66 mm673 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.48 in (76 × 63 mm)0.99 mm1,009 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.31 in (102 × 84 mm)1.3 mm1,345 mm6Vinyl, card and thin sheet
6 × 4.97 in (152 × 126 mm)2 mm2,018 mm2Vinyl, card and thin sheet
8 × 6.62 in (203 × 168 mm)2.6 mm2,690 mm1Vinyl, card and thin sheet
12 × 9.94 in (305 × 252 mm)4 mm4,036 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More donut SVG files

← Birthday donut with a candle All 16 donuts Pile of three donuts →