Free donut SVG

Donut with icing and sprinkles SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Donut with icing and sprinkles, as a solid black shape
Donut with icing and sprinkles. The preview is the SVG file itself.

A ring donut from above: a wavy line marks the edge of the icing and sprinkles are cut out of it. Small bridges across the line keep the rim of dough attached.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut27: 1 outer edge and 26 cut-outs
Cut length1,397 mm at this size
Narrowest part1.9 mm at this size
Nodes205 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.48 mm355 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.97 mm710 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)1.4 mm1,065 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)1.9 mm1,419 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)2.9 mm2,129 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)3.9 mm2,839 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)5.8 mm4,258 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More donut SVG files

← Layered donut in three colours All 16 donuts Plain ring doughnut →