Free donut SVG

Cute donut with a face SVG

Cute donut with a face, as a solid black shape
Cute donut with a face. The preview is the SVG file itself.

A cartoon donut: two round eyes and a smile below the hole, rosy cheeks, and a few sprinkles over the top half. For party invitations and sticker sheets.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut23: 1 outer edge and 22 cut-outs
Cut length749 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes110 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)Over 1.5 mm190 mm100Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)Over 3 mm380 mm25Any material, including 3 mm wood and acrylic
3 × 3 in (76 × 76 mm)Over 4.6 mm571 mm9Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)Over 6.1 mm761 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)Over 9.1 mm1,141 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)Over 12 mm1,522 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)Over 18 mm2,283 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More donut SVG files

← Donut with a bite taken out All 16 donuts Heart-shaped donut →