Free donut SVG

Donut monogram frame SVG

Donut monogram frame, as a solid black shape — Donut monogram frame. The preview is the SVG file itself.

A donut with a wide hole about 48 mm across, left empty for an initial, and dripping icing marked on the ring round it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	1,457 mm at this size
Narrowest part	3.2 mm at this size
Nodes	259 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.81 mm	370 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.6 mm	740 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	2.4 mm	1,110 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	3.3 mm	1,480 mm	4	Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)	4.9 mm	2,220 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	6.5 mm	2,961 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	9.8 mm	4,441 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More donut SVG files

← Flower-shaped donut All 16 donuts Birthday donut with a candle →