Free donut SVG

Birthday donut with a candle SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Birthday donut with a candle, as a solid black shape
Birthday donut with a candle. The preview is the SVG file itself.

An iced donut with a striped candle and its flame standing on the top edge. One candle, so it suits any birthday.

What is in the file

Size71 × 100 mm (2.79 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut27: 1 outer edge and 26 cut-outs
Cut length1,054 mm at this size
Narrowest part1 mm at this size
Nodes218 curve and line segments

Measured from the file. PNG: 1,440 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.71 × 1 in (18 × 25 mm)0.25 mm268 mm130Too fine for most machines
1.42 × 2 in (36 × 51 mm)0.51 mm535 mm35Fine detail: vinyl and paper only, weed with care
2.13 × 3 in (54 × 76 mm)0.76 mm803 mm15Fine detail: vinyl and paper only, weed with care
2.84 × 4 in (72 × 102 mm)1 mm1,071 mm8Vinyl, card and thin sheet
4.25 × 6 in (108 × 152 mm)1.5 mm1,606 mm2Vinyl, card and thin sheet
5.67 × 8 in (144 × 203 mm)2 mm2,142 mm2Vinyl, card and thin sheet
8.51 × 12 in (216 × 305 mm)3 mm3,213 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More donut SVG files

← Donut monogram frame All 16 donuts Stack of three donuts →