Free donut SVG

Donut outline SVG

Donut outline, drawn as a line — Donut outline. The preview is the SVG file itself.

A donut in line only, about 2.3 mm wide: the dough, the hole, the wavy edges of the icing and a ring of sprinkles. The lines are separate loops, so use it for colouring, foil and pen plotting.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	16 separate pieces
Outlines to cut	20: 16 outer edges and 4 cut-outs
Cut length	1,780 mm at this size
Narrowest part	2.4 mm at this size
Nodes	202 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.61 mm	452 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.2 mm	904 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	1.8 mm	1,356 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	2.4 mm	1,808 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	3.7 mm	2,713 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	4.9 mm	3,617 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	7.3 mm	5,425 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More donut SVG files

← Plain ring doughnut All 16 donuts Sprinkle donut →