Free donut SVG

Donut icing layer SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Donut icing layer, as a solid black shape
Donut icing layer. The preview is the SVG file itself.

The icing on its own: a wavy-edged ring with sprinkles cut from it. Cut it in pink or chocolate brown and lay it on the plain ring doughnut.

What is in the file

Size99 × 100 mm (3.9 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut20: 1 outer edge and 19 cut-outs
Cut length759 mm at this size
Narrowest part3.4 mm at this size
Nodes120 curve and line segments

Measured from the file. PNG: 1,983 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.99 × 1 in (25 × 25 mm)0.86 mm193 mm100Fine detail: vinyl and paper only, weed with care
1.98 × 2 in (50 × 51 mm)1.7 mm386 mm25Vinyl, card and thin sheet
2.97 × 3 in (76 × 76 mm)2.6 mm578 mm9Vinyl, card and thin sheet
3.96 × 4 in (101 × 102 mm)3.5 mm771 mm4Any material, including 3 mm wood and acrylic
5.95 × 6 in (151 × 152 mm)5.2 mm1,157 mm1Any material, including 3 mm wood and acrylic
7.93 × 8 in (201 × 203 mm)6.9 mm1,542 mm1Any material, including 3 mm wood and acrylic
11.89 × 12 in (302 × 305 mm)10 mm2,313 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More donut SVG files

← Donut with dripping icing All 16 donuts Donut with a zigzag drizzle →