Free donut SVG

Donut with a bite taken out SVG

Donut with a bite taken out, as a solid black shape — Donut with a bite taken out. The preview is the SVG file itself.

An iced donut with three scalloped tooth marks in its upper right edge. For a snack bar sign, or the last page of a diet planner.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	23: 1 outer edge and 22 cut-outs
Cut length	1,243 mm at this size
Narrowest part	3.6 mm at this size
Nodes	187 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.91 mm	316 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.8 mm	631 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	2.7 mm	947 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	3.7 mm	1,263 mm	4	Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)	5.5 mm	1,894 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	7.3 mm	2,526 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	11 mm	3,789 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More donut SVG files

← Donut with a zigzag drizzle All 16 donuts Cute donut with a face →